Printing FAQ.


Question:
When printing the print does not line up with the Transfer Return.
Where can the Print position be adjusted ?

Answer:
Adjusting the print position in TReturn is done from the main screen.
   (1)  From TReturn's main screen, select the menu items under File for each Printer Setup.
         Change the Left and Top adjustment values in the dialog.
         The adjustments can be tested from the dialog as well.
         Note: this should be done for each of the 3 Printers needing adjustment.


Question:
When printing from the bypass or manual tray, the printer does not wait for the paper to be inserted.
How can I make the printer wait for paper to be inserted ?

Answer:
If You wish to Print from the Bypass or Manual Feed tray and force the printer to wait.
   (1)  From TReturn's main screen, select the menu items under File for each Printer Setup.
         Set the Paper size to A4 in the dialog.
         Set the Paper Source to Bypass or Manual Feed.
         Note: this should be done for each of the 3 Printers needing a wait.


Version change FAQ.

Question:
After installing a new version of TReturn.
When adding or modifying a Transfer Return,
Why does some of the entered information not get saved ?

Answer:
Starting with TReturn version 8.14xx,
the length for several entries has been increased.
Files that were created prior to the release of version 8.14xx
do not support the longer entries.

To add support for the longer entries to the current TReturn file,
from the main TReturn screen choose the menu File|Save File As.
Enter a new Filename. Select OK.
The new TReturn file will support the use of longer entries.

To add support for the longer entries to a template file,
from the main TReturn screen choose the menu Templates|Edit a Template.
Select a template file (the Template Edit screen appears).
Choose the menu Tasks|Save Displayed Return as a Template.
Select the currently displayed Template file and click Save.
The Template file will support the use of longer entries.
NOTE: updating TReturn files for longer entries is only needed
for TReturn files created in a TReturn version 8.xxxx prior to 8.14xx.